and Applied Mechanics
56, 3, pp. 571-583, Warsaw 2018
DOI: 10.15632/jtam-pl.56.3.571
Stiffness and damping characteristics of MR fluid-based sandwich beams: experimental study
magnetorheological fluids (MRFs) differing in the iron particle content by volume. Outer
layers are made of aluminium, the space between them is sealed with silicone rubber. Two
types of beams are considered: fully filled beams and partially filled beams, subjected to the
magnetic field. The aim of the study is to determine stiffness and damping characteristics
in relation to the magnetic field strength and the actual location where the magnetic field
acts upon the beam. For this purpose, measurements have been taken of the beam free
vibration response for various magnetic field strength levels and for various positions of
the electromagnet located along the beam axis. Basing on the developed measurement data
processing algorithm, the influence of the vibration amplitude on the natural frequency and
a dimensionless damping coefficient have been determined. Finally, the equivalent natural
frequency and the dimensionless damping coefficient have been derived accordingly, and the
stiffness and damping ratio have been determined in function of the magnetic field strength,
the electromagnet position and the MRF iron particle content by volume.
References
DiTaranto R.A., 1965, Theory of vibratory bending for elastic and viscoelastic layered finitelength
beams, Journal of Applied Mechanics, 87, 881-886
Lara-Prieto V., Parkin R., Jackson M., Silberschmidt V., Kesy Z., 2010b, Vibration
characteristics of MR cantilever sandwich beams: experimental study, Journal of Smart Materials
and Structures, 19, 1
Rajamohan V., Rakheja S., Sedaghati R., 2010a, Vibration analysis of a partially treated
multi-layer beam with magnetorheological fluid, Journal of Sound and Vibration, 329, 3451-3469
Rajamohan V., Ramamoorthy M., 2012, Dynamic characterization of non-homogeneous magnetorheological
fluids based multi-layer beam, Applied Mechanics and Materials, 110-116, 105-112
Rajamohan V., Sedaghati R., Rakheja S., 2010b, Optimum design of a multilayer beam
partially treated with magnetorheological fluid, Journal of Smart Materials and Structures, 19, 1
Rajamohan V., Sedaghati R., Rakheja S., 2010c, Vibration analysis of a multi-layer beam
containing magnetorheological fluid, Journal of Smart Materials and Structures, 19, 1
Rajamohan V., Sedaghati R., Rakheja S., 2011, Optimal vibration control of beams with
total and partial MR-fluid treatments, Journal of Smart Materials and Structures, 20, 11
Romaszko M., 2013, Free vibration control of a cantilever MR fluid based sandwich beam, Pro-
ceedings of the 14th International Carpathian Control Conference (ICCC), Rytro, Poland, May 26-29, 2013
Romaszko M., Lacny L., 2015, Magnetic field analysis of the actuator in a semi-active vibration
control of the beam with MR fluid, Applied Mechanics and Materials, 759, 37-44
Romaszko M., Pakula S., Sapinski B., Snamina J., 2011, Vibration parameters of sandwich
beams with two types of MR fluid, Mechanics and Control, 30, 3, 151-156
Romaszko M., Sapinski B., Sioma A., 2015, Forced vibrations analysis of a cantilever beam
using the vision method, Journal of Theoretical and Applied Mechanics, 53, 1, 243-254
Romaszko M., Snamina J., Pakula S., 2014, Composite beam’s parameters identification based
on frequency responses, Proceedings of the 15th International Carpathian Control Conference
(ICCC), Velke Karlovice, Czech Republic, May 28-30
Snamina J., Sapinski B., Wszołek W., Romaszko M., 2012a, Investigation on vibrations
of a cantilever beam with magnetorheological fluid by using the acoustical signal, Acta Physica
Polonica A, 121, 1-A, 188-190
Snamina J., Sapinski B., Romaszko M., 2012b, Vibration parameter analysis of sandwich
cantilever beams with multiple MR fluid segments, Engineering Modeling, 12, 43, 247-254
Sun Q., Zhou J.X., Zhang L., 2003, An adaptive beam model and dynamic characteristics of
magnetorheological materials, Journal of Sound and Vibration, 261, 465-481
Yalcintas M., Dai H., 1999, Magnetorheological and electrorheological materials in adaptive
structures and their performance comparison, Journal of Smart Materials ans Structures, 8, 560-573
Yalcintas M., Dai H., 2004, Vibration suppression capabilities of magnetorheological materials
based adaptive structures, Journal of Smart Materials and Structures, 13, 1-11
Yeh Z.F., Shih Y.S., 2006, Dynamic characteristics and dynamic instability of magnetorheological
material-based adaptive beams, Journal of Composite Materials, 40, 1333-1359